Just Wait...

Our Products

MATERIAL SAFETY DATA SHEET

Work Sample 1

Product Identifications

  • Product Name: Sulphur Powder
  • Chemical Name: Elemental Sulphur

Physical Description/Properties

  • Specific Gravity: 2.07
  • Melting Point (C° Min): 112-119
  • PH Value NA
  • Appearance: Yellow Powder
  • Solubility: Insoluble in water
  • Volatiles % <0.15
  • Ash % <0.1
Work Sample 1
Work Sample 1

Hazard Information Combustible Dust

  • Keep away from heat, sparks and flame.
  • Eye irritant-Can cause redness, tearing and swelling.
  • Skin contact may cause allergic reaction.
  • Inhalation may cause upper respiratory irritation.
  • Ingestion:Sulphur has a low order of toxicity.

First Aid Information

  • Skin: Remove contaminated clothing and wash before re-use. Immediately wash contaminated skin with running water.
  • Ingestion: Immediately rinse mouth with water. Induce vomiting only at the instruction of a physician. Seek immediate medical attention if large amounts are swallowed.
  • Eyes: Flush with water for 15 minutes. Seek medical attention if irritation persists.
  • Inhalation: Remove person to fresh air. Get immediate medical attention if breathing is difficult or short.
Work Sample 1
Work Sample 1

Handling and Storage

  • Storage: Store in a dry well-ventilated area avoiding direct exposure to sunlight
  • Stability in storage: two years

Employee Protection Recommendations

The employee should wear protective clothes and avoid direct physical contact with the product.

  • Eye Protection: Wear chemical safety glasses or goggles
  • Hand Protective Requirements: Wear protective gloves.
  • Skin Protective Requirements: Wear overalls.
  • Ventilation: Local exhaust
Work Sample 1
Work Sample 1

Fire and Explosion Data

  • Flash point: 207°C
  • Exposure standard limits: Lower 35g/m3, Upper 1400g/m3
  • Flammable Extinguish Media: Spray water, Carbon Dioxide or steam.
  • Conditions to avoid: Dusts or vapours can form explosive mixtures with air.

Reactivity

  • Chemical stability: Stable when stored in original container protected from heat and moisture.
  • Hazardous Polymerization: Does not occur.
  • Materials to avoid: Strong oxidizer, nitrates, charcoal, metals, carbides and halogens.
  • Hazardous products of decomposition: Oxides of sulphur, hydrogen sulphide.
  • Ventilation: Local exhaust
Work Sample 1
Work Sample 1

Accidental Release and Disposal

  • Spills: Sweep and place in closable container. Avoid generation of dust. Wear appropriate protective clothing and safety devices. Do not use water to remove spilled material.
  • Disposal: Bury waste and empty containers in licensed landfill in adherence to federal, state and local regulations.

Transportation Information

  • Domestic: Transportation is laminated HDPE bags of 25 Kgs/50Kgs, with double seals.
  • International: Containerized in laminated HDPE or paper bags of 25 Kgs/50 Kgs with double seals.
Work Sample 1

Specifications for Soluble Sulphur

S. No Material Properties U/M Sample Results MIN Mx
1 Wet Slieve, Retained On 150 Micrometer (100 Mesh Screen) %     0.50
2 Wet Slieve, Retained On 75 Micrometer (200 Mesh Screen) %   3.0 9.0
3 Solubility In Carbon Disulphide %   98.0 99.95
4 Acidity In H2 So4 %   0.003 0.10
5 ASH %     0.10
6 Heat Loss, 2 Hours @ Degree Celsius %     0.15
7 Iron Content %   0 300
8 Dispersion Oil %   0 1.4